Semi-automatic saws have powered material clamping and controlled blade feed rate that is initiated with a foot switch actuation, for fast cutting different size of metal pipes. A semi-automatic coldsaw usually has a foot switch start that initiates the cycle. The blade starts, the powered vice clamps the workpiece and the cutting head feeds the blade through the material at a controlled rate. Powered bow raise lifts the head after the piece has been cut.
• For stainless steel cutting;
– Low speed motor (22/44 rpm)
– Variable blade speed with inverter (20-80 rpm)
• Oil mist spray lubrication system
• Material support roller
• Saw Blade
| CUTTING CAPASITY | ||
| Maximum Saw Blade Size Ø | 315 mm | |
| Head Swivel | 90° | 45° |
| Round (mm) | 105 | 90 |
| Square (mm) | 85×85 | 80×80 |
| Rectangle (mm) | 120×60 | 90×60 |
|
TECHNICAL SPECIFICATIONS |
|
||
|
Main Voltage (V) |
400 |
||
|
Control Voltage (V) |
24 |
||
|
Nominal Current (A) |
4,7 |
||
|
Installed Power (kW) |
1,85 |
||
|
Main Saw Motor (kW) |
1,3-1,8 |
||
|
Coolant Pump Motor (kW) |
0,06 |
||
|
Air Pressure (Consumption) |
6 kg/cm2 (240 ℓ/min) |
||
|
Blade Speed (RPM) |
45/90 |
||
|
Head Swivel |
90°/45° |
||
|
Saw Blade Size (mm) |
Diameter |
315 |
|
|
Bore |
32 |
||
|
Pin Holes |
2xØ11 / Pivot Center Ø63 |
||
|
Machine Dimensions (LxWxH) mm |
1.000x600x1.400 |
||
|
Net Weight (Kg) |
240 |
||
To get more detailed information about our products or to request a product, fill out the form completely and send it to us. Our relevant team mate will get back to you as soon as possible.
Heavy duty semi-automatic circular saw designed for fast cutting with automatic horizontal mitre positioning.
Semi-automatic extra heavy duty circular saw for fast cutting different size of metal pipes.
Semi-automatic heavy duty circular saw for fast cutting different size of metal pipes.
Semi-automatic saws have powered material clamping and controlled blade feed rate that is initiated with a foot switch actuation, for fast cutting different size of
