Compact, pull down manual circular saw with powered material clamping and operated by a hand lever, offer easy mitre cutting for the workshop or toolroom.
• Air-operated clamp for material vice
• Robust Double Hinged Pivot
• Low voltage start/stop trigger switch within the pull down hand grip
• Counterbalance spring
• Miter capabilities 45 degrees left and 45 degrees right
• Double split vice to grip material on both sides of the material
• Self centering of vice optimizes cutting position
• Two cutting speeds
• Adjustable bar stop 500mm
• Large base for ultra-stability.
• Electric coolant pump with tank
• Low speed motor for stainless steel cutting (20/40 rpm)
• Oil mist spray lubrication system
• Material support roller
• Saw Blade
|
CUTTING CAPASITY |
||
| Maximum Saw Blade Size Ø | 350 mm | |
| Head Swivel | 90° | 45° |
| Round (mm) | 115 | 110 |
| Square (mm) | 100×100 | 90×90 |
| Rectangle (mm) | 120×80 | 90×90 |
|
TECHNICAL SPECIFICATIONS |
||
| Main Voltage (V) | 400 | |
| Control Voltage (V) | 24 | |
| Nominal Current (A) | 4,7 | |
| Installed Power (kW) | 1,85 | |
| Main Saw Motor (kW) | 1,3-1,8 | |
| Coolant Pump Motor (kW) | 0,06 | |
| Air Pressure (Consumption) | 6 kg/cm2 (120 ℓ/min) | |
| Blade Speed (RPM) | 40/80 | |
| Head Swivel | 90°/45° | |
| Saw Blade Size (mm) | Diameter | 350 |
| Bore | 32 | |
| Pin Holes | 2xØ11 / Pivot Center Ø63 | |
| Machine Dimensions (LxWxH) mm | 1.000x600x1.400 | |
| Net Weight (Kg) | 220 | |
To get more detailed information about our products or to request a product, fill out the form completely and send it to us. Our relevant team mate will get back to you as soon as possible.
Compact, pull down manual circular saw with powered material clamping and operated by a hand lever, offer easy mitre cutting for the workshop or toolroom.
Compact, pull down manual circular saw with powered material clamping and operated by a hand lever, offer easy mitre cutting for the workshop or toolroom.
